ZyXEL Communications IES-1248 VDSL-SWITCH User Manual page 140

IES-1248 User's Guide
LABEL
MAC
Add
Cancel
Port
Active
MAC
Delete
Apply
16-2
Table 16-1 MAC Filter
Type a device's MAC address in hexadecimal notation (xx:xx:xx:xx:xx:xx, where x is a
number from 0 to 9 or a letter from a to f) in this field. The MAC address must be a valid
MAC address. You may specify up to ten MAC addresses per port.
Click Add to save your changes to the IES-1248's volatile memory. The IES-1248 loses
these changes if it is turned off or loses power, so use the Config Save link on the
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Click Cancel to begin configuring this screen afresh.
These are the numbers of the ADSL ports.
Select this check box to turn on MAC filtering for a port.
This field lists the MAC addresses that are set for this port.
Click Delete to remove a MAC address from the list.
Click Apply to save your changes to the IES-1248's volatile memory. The IES-1248
loses these changes if it is turned off or loses power, so use the Config Save link on the
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
DESCRIPTION
Spanning Tree Protocol