ZyXEL Communications IES-1248 VDSL-SWITCH User Manual page 201

COMMAND
ping
statistics
monitor
adsl
igmpsnoop
rstp
vlan
mac
port
dot1x
enet
Commands
Table 28-1 Commands
show
set
delete
flush
<ip> [count]
show
linedata
lineinfo
lineperf
linerate
15mperf
1dayperf
<portlist>
[<vpi> <vci>]
[clear]
<dst ip>[/netmask]
<gateway ip>
[metric] <name>
default <gateway
ip> <metric>
<dst ip>[/netmask]
[portlist]
<portlist>
<portlist>
<portlist>
<portlist>
<portlist> [count
<0..96>]
<portlist>
IES-1248 User's Guide
DESCRIPTION
Displays the routing table.
Adds a routing table entry.
Sets the IES-1248's default
route.
Removes a routing table
entry.
Clears the routing table.
Pings a remote host.
Displays hardware monitor
statistics.
Displays ADSL port
connection statistics.
Displays the line data load
per symbol (tone).
Displays the statistics of the
specified ADSL ports.
Displays the line quality of
the specified ADSL port.
Displays the line rate.
Displays line performance
statistics for the current and
previous 15-minute periods.
Displays line performance
statistics for the current and
previous 24 hours.
Displays IGMP snooping
statistics.
Displays RSTP statistics.
Displays current VLANs.
Displays current MAC
address forwarding table.
This command displays
and/or erases port statistics.
Displays IEEE 802.1X
statistics.
Displays Ethernet port
settings and statistics.
28-13