ZyXEL Communications IES-1248 VDSL-SWITCH User Manual page 164

IES-1248 User's Guide
LABEL
Start Address
End Address
Telnet/FTP/Web/ICMP
Apply
Cancel
22-8
Table 22-9 Secured Client Setup
Configure the IP address range of trusted computers from which you can manage the
IES-1248.
The IES-1248 checks if the client IP address of a computer requesting a service or
protocol matches the range set here. The IES-1248 immediately disconnects the
session if it does not match.
Select services that may be used for managing the IES-1248 from the specified
trusted computers.
Click Apply to save your changes to the IES-1248's volatile memory. The IES-1248
loses these changes if it is turned off or loses power, so use the Config Save link on
the navigation panel to save your changes to the non-volatile memory when you are
done configuring.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Access Control