Making Several Copies Of The Same Original - Ricoh FW770 Operating Instructions Manual

MAKING SEVERAL COPIES OF THE SAME ORIGINAL

Repeated copying means making two or more copies of a original. To make more than one copy
of the same original, you have to reload the original after each copy. If you're not using the Roll
Feeder (option), you also have to set the copy paper for each copy.
Notes
with this feature, the image might be copied at a slant. Whether this happens depends on the
original size, type, and condition(e.g., curled, wavy, originals). In such a case, make one copy
at a time.
You cannot use the repeated copy function in the following cases:
— When using the Carrier Sheet (option).
Press the + and - keys to specify the number
of copies.
When you press the Clear/Stop key, the num-
ber of copies returns to "1".
Proceed as for a usual copy, with sheet paper
(page 13), or with the Roll Feeder (page 19).
When the copy comes out, remove it and
repeat step2. wait for the "Set Paper" indicator
to light up before loading a new sheet of
paper, and wait for the " Set Original"
indicator to light up before reloading the
original.
30
Paper Length
Cut Select
Semi Synchro
Preset/
Variable
Preset Cut
Leading Edge
Copy Counter
Function Select RF Select /Cut