B) Changing The Default Setting - Ricoh FW770 Operating Instructions Manual

Copy Settings
Recalling Settings Stored in the Program key
A
Press the { { { { Program} } } } key before copying.
3
B
Enter the number of copies required with the { { { { +} } } } and { { { { —} } } } key.
C
Make a copy.

B) Changing the Default Setting

A
Turn off the main switch.
B
While holding down the { { { { Emergency Stop} } } } key, turn the copier back on.
The jam and service indicators will blink.
C
Input the settings you want.
36