Operation Panel - Ricoh FW770 Operating Instructions Manual

Operation Panel

1
Function Select
1. Function indicators
2. Paper length display
3. Preset Cut key
4. Cut Select key
5. Energy Saver indicator
6. Troubleshooting
7. Wait indicator
8. Ready/Set Original indicator Lights up when the copier is ready to receive an original.
6
2
Paper Length
Synchro
Preset/
Variable
Leading Edge
Trailing Edge
Copy Counter
1 2 1 3 1 4
These indicators show which setting you are currently editing.
Press the Function key to cycle through them.
The top indicator lights when the paper length is being set.
The second indicator lights when the leading margin is being set.
The third indicator lights when the trailing margin is being set.
The fourth indicator lights when the number of copies is being
set.
Shows the length of paper the Roll Feeder will send.
Scrolls through the preset paper lengths for the Roll Feeder.
Turns Synchro Cut or Preset/Variable Cut on/off.
Shows that it is in a state of wait (Energy Saver).
Press key 10.
See page 49 for details.
Shows that the copier is not yet ready to copy.
3 4 5 6
Energy
Cut Select
Saver
Preset Cut
Vellum
Film
Bypass Select/
Roll Paper Cut
Copy Media Lighter
Emergency Stop
1 5 1 6
7 8 9 1 0
Clear Modes/
Set
Energy Saver
Original
Program
Wait
Lighter Copy
Darker Clear/Stop
1 7 1 8
1 1
1 9