Operation Panel - Ricoh FW770 Operating Instructions Manual

Operation Panel

1
Paper Length
Semi Synchro
Preset/
Variable
Leading Edge
Copy Counter
Function Select
1 2
1. Function indicators
2. Paper length display
3. Preset Cut key
4. Cut Select key
5. Energy Saver indicator
6. Troubleshooting
7. Wait indicator
8. Ready/Set Original
6
2 3 4
Cut Select
Preset Cut
RF Select /Cut Copy Media Lighter
1 3 1 4 1 5 1 6
These indicators show which setting you are currently editing, Press
the Function key to cycle through them.
The top indicator lights when the paper length is being set.
The middle indicator lights when the lead margin is being set.
The bottom indicator lights when the number of copies is being set.
Shows the length of paper the Roll Feeder will send.
Scrolls through the preset paper lengths for the Roll Feeder.
Turns Semi synchro Cut, or Preset/Variable Cut on/off.
Shows that it is in a state of wait (Energy Saver). Press key 10.
See page 51 for details.
Shows that the copier is not yet ready to copy.
Lights up when the copier is ready to receive an original.
5 6 7 8
Energy Set
Saver Original
Set RF
Paper Select
Wait
Lighter Copy
Vellum
Film
Darker
Emergency Stop
1 7
9 1 0 1 1
Clear Modes/
Energy Saver
Program
Clear/Stop
1 8 1 9