Adding Toner - Ricoh FW770 Operating Instructions Manual

MAINTAINING YOUR COPIER

Adding Toner

The add toner indicator blinks when toner is running short. When the in-
dicator starts blinking, you can still copy about 16 m (about 53', or 27
A4 size copies). When the indicator stays on, you can't copy until a new
cartridge is put in. Follow the steps below.
20
1. Lift the original table until it locks
in place.
2. Open the toner cartridge cover.
3. Turn the old cartidge towards
you. Then, while pressing the
cartridge to the right, lift the left
end and remove the cartridge.
Adding Toner