Others - Ricoh FW770 Operating Instructions Manual

Troubleshooting

Others

If a puzzling or recurring problem occurs, check the following before calling a
service representative. It's also a good idea to check the
to make sure the paper and originals match what the copier can handle.
Absolutely nothing happens
• Is the main switch on?
• Is the power cord plugged in?
• Did a breaker or a fuse blow out?
Something happens, but Set Paper or RF Select never appear
• Check the indicators on the control panel. If any of them are lit, turn to
5
Check that all covers and units are closed.
If Jams Occur Frequently
• Is your paper creased, damp, or otherwise damaged?
• Are there visible bits of paper or other objects stuck in the machine? If there
are, remove them.
• Are you inserting the paper and original in straight? Always feed paper in
straight.
If Copies Look Wrong
• Are copies too dark or too light? Adjust the density (
• Is the background dirty no matter what kind of original you are copying?
Make sure the exposure glass and platen are clean (
• Is the image skewed? Make sure to insert the paper and the original straight
into the machine. If you have the Original and Copy Guides (option), use
them.
White Spots Appear
• On the copy: try setting your copy paper with the other side facing up.
• At the leading edge: try setting your copy paper sideways.
• At the trailing edge: try giving a rising curl to the trailing edge. The curl
should go up, not down.
70
P.73 "Do's & Don'ts"
P.61.
P.8.
P.29).
P.72).