Variable Cutting - Ricoh FW770 Operating Instructions Manual

Variable Cutting

This function cuts roll paper in a length you specify.
Notes
p The variable cut can handle the cut length from 245 to2,000mm,9.6"to 78.7".
Press the Preset Cut key. The "Preset/Variable" indicator lights up and the "Paper Length"
display shows the default Preset Cut length. (1189mm, or 48.0").
Press the Preset Cut key to display the nearest value you want.
Press + key or - key to specify the most appropriate length.
Choose any copy settings you require.
Press the RF select key to turn on the "RF Select" indicator.
Continue from step4 of P. 20.
Paper Length
Cut Select
Semi Synchro
Preset/
Variable
Preset Cut
Leading Edge
Copy Counter
Function Select RF Select /Cut Copy Media Lighter
Clear Modes/
Energy Set
Energy Saver
Saver Original
Set RF
Paper Select
Wait
Lighter Copy
Vellum
Film
Darker Clear/Stop
Emergency Stop
Program
23