Using the Rear Table
Set thick originals (0.19mm, 35µ~1mm) or originals less than 297mm in width and more than
1200mm in length, on the Rear Table.
Notes
p You cannot use the following functions using the Rear Table.
Repeated Copying
Synchro cutting function with roll paper
Partial Copying
Choose any copy setting you require.
For manual copying, set paper.
Pull up the guide to avoid reversing the original.
Insert the original face down on the Rear
Table.
When the machine scans the original and starts
copying, support the original with your hands
in front of the machine.
Clear/Stop key and remove the original.
18
Energy
Set
Saver
Original
Wait
Lighter Copy
Vellum
Film
Copy Media Lighter
Darker
Emergency Stop
SM051
Clear Modes/
Energy Saver
Program
Clear/Stop