What Your Service Representative Can Change - Ricoh FW770 Operating Instructions Manual

COPYING
The next time you turn the copier on or press the Clear Modes key, the
settings you programmed in step 3 will be in effect.

What Your Service Representative Can Change

Your service representative can adjust some of your copier's features.
Here's a list of changes the service representative can make for you.
F
Copy media default: The copy media setting can be adjusted
to match the kind of paper you use.
F
Count up and count down: The copy counter can be made to
count up or count down.
F
Beeper: The beeper can be turned off completely; can be
turned off for setting the margin, multiple copies, and paper
length; or it can be left on to emit a tone whenever a key is
pressed.
F
Paper feed out waiting time: When the copier is ready to re-
ceive the original, it will wait for a preset length of time. If no
original is set within this time, the copier will process the copy
paper without copying. The time can be set to 1, 2, 3, 4, or 5
minutes.
F
Manual feed start time: After copy paper is set, the copier
waits for a preset number of seconds before starting the rollers
that will pull the paper in. This pause gives you a chance to align
the paper. The time can be set to 0.7, 1, 2, 3, 4, or 5 seconds.
16
What Your Service Representative Can Change
3. Input the settings you want.
C
4. Turn off the main switch.
C/