Preset Cutting - Ricoh FW770 Operating Instructions Manual

Preset Cutting

This function cuts roll paper to a selected length. The paper is cut to this length regardless of the
original size.
Notes
p By the default Preset Cut length is as follows. For the change of the Preset Cut length pattern,
please contact your service representatives.
Metric Version: 1189mm, 841mm, 594mm, 420mm, 297mm
Inch Version: 48.0", 42.0", 36.0", 24.0", 18.0", 12.0"
Press the Preset Cut key. The "Preset/Variable" indicator lights up and the "Paper Length"
display shows the default Preset Cut length. (1189mm, or 48.0").
Press the Preset Cut key several times until the indicator shows the value you want.
Choose any copy settings you require.
Press the RF select key to turn on the "RF Select" indicator.
Continue from step4 of P. 20.
22
Paper Length
Cut Select
Semi Synchro
Preset/
Variable
Preset Cut
Leading Edge
Copy Counter
Function Select RF Select /Cut Copy Media Lighter
Clear Modes/
Energy Set
Energy Saver
Saver Original
Set RF
Paper Select
Wait
Lighter Copy
Vellum
Film
Darker Clear/Stop
Emergency Stop
Program