Preset Cutting - Ricoh FW770 Operating Instructions Manual

Preset Cutting

This function cuts roll paper to a selected length. The paper is cut to this length regardless of the
original size.
Notes
p By the default Preset Cut length is as follows. For the change of the Preset cut length pattern,
please contact your service representatives.
Metric Version: 1189mm, 841mm, 594mm, 420mm, 297mm
Inch Version: 48.0", 42.0", 36.0", 24.0", 18.0", 12.0"
Press the Bypass Select key to turn on the "RF Select" indicator.
Press the Preset Cut key. The "Preset/Variable" indicator lights up and the "Paper Length"
display shows the default Preset Cut length(1189mm, or 48.0").
Press the Preset Cut key several times until the indicator shows the value you want.
Choose any copy settings you require.
Continue from step4 on page20.
22
Paper Length
Cut Select
Synchro
Preset/
Variable
Preset Cut
Leading Edge
Trailing Edge
Copy Counter
Bypass Select/
Function Select Roll Paper Cut
2, 3
Energy Set
Saver Original
Wait
Lighter Copy
Vellum
Film
Copy Media Lighter Darker
Emergency Stop
1
1
Clear Modes/
Energy Saver
Program
Clear/Stop