Igp/Pgl Submenu (With Lg); Define Cr (Carriage Return) Code - Printronix P7010 User Manual

IGP/PGL Submenu (With LG)

EMULATION
(from page 59)
IGP/PGL
Define CR Define LF
Code Code
CR = CR* LF = LF*
CR = CR + LF LF = CR + LF
Select LPI Auto
Uppercase
6.0* Disable*
8.0 Enable
9.0
10.0
Ignore IGP100
Char Compatbl.
Ignore Mode Disable*
Disable* Enable
Enable
Select Char
0*
(0-255)

Define CR (Carriage Return) Code

This parameter forces the printer to insert an automatic Line Feed code into
the data stream whenever a Carriage Return code occurs. This is to be used
only if the host computer does not send line feeds to the printer.
•
CR = CR (default). Does not perform a line feed. The next print position
will be print position 1 of the current line.
•
CR = CR + LF. Performs an automatic line feed. The next print position
will be print position 1 of the next line.
Autowrap PGL
SFCC
Disable* 7E*
Enable
Skip Cmd Power On
Prefix IGP/PGL
Enable* Enable*
Disable Disable
Optimized
Ratio
Disable*
Enable
IGP/PGL Submenu (With LG)
* = Factory Default
PI Slew CR Edit
Range
16* Disable*
15 Enable
Ext Execute UPC
Copy Descenders
Disable* Enable*
Enable Disable
Select Font
0*
1-34
Compressed
CPI
Disable*
Enable
179