Chapter
4
PRINTER CONTROL
PRINTER CONTROL
PRINTER
CONTROL
(from page 60)
Ribbon End
Open Platen
Point
@BOF
Darker +6
Disable*
Darker +5
Enable
Darker +4
Darker +3
Darker +2
Darker +1
Normal*
Lighter -1
Lighter -2
Lighter -3
Lighter -4
Lighter -5
Lighter -6
Lighter -7
Lighter -8
Lighter -9
Lighter -10
Display
Accented
Language
Char
English
Standard*
German
Tall
French
Italian
Spanish
Portuguese
Ribbon End Point
This parameter adjusts the point at which the system will declare the ribbon
as being expended. The life count will always be from 100% to 0%, but if a
darker setting is selected 0% will be reached more quickly. If a lighter setting
is selected, the system will extend the time it takes to reach 0%. The range of
values are as follows:
•
Normal (default)
•
Darker +1 through Darker +6
•
Lighter -1 through Lighter -10
NOTE: This value can be adjusted at any time and the display will
218
Bar Code
Quality
Dark*
7.46 inches.*
Draft
(4.5 - 10.5)
1
automatically adjust to show the correct percentage relative to the
new end point.
* Factory Default
1
Not available in LG or PCL-II
2
Available for Pedestal printers only
Tear Bar
View
2
Dist.
Function
Disable*
Enable
Unidirectional
Disable*
Enable