Print Config; Load Config; Delete Config; Power-Up Config - Printronix P7010 User Manual

Chapter 4
CONFIG. CONTROL

Load Config.

The printer can store numerous configurations in memory. This parameter
allows you to select and load a specific configuration.
Save Config.
This option allows you to save up to eight configurations to meet different print
job requirements. This eliminates the need to change the parameter settings
for each new job. The configurations are stored in memory and will not be lost
if you turn off the printer. If the Protect Configs. parameter is enabled, the new
configuration will not be saved unless the existing configuration has been
deleted first. The factory default configuration cannot be changed. See
"Saving Your New Configuration" on page 52 for details.

Print Config.

This option is used to print a listing of various stored printer configurations.
Store printouts of your configurations in a safe place for quick referral.

Delete Config.

You can delete one or all of your eight customized configurations. The factory
default configuration cannot be deleted.

Power-Up Config.

You can specify which of the nine configurations (Factory or 1-8) will be the
power-up configuration.

Protect Configs.

You can specify whether or not a new configuration should overwrite an
existing configuration when you activate the Save Configs. parameter. When
disabled (default), the new configuration will overwrite the existing
configuration. When enabled, the new configuration will not overwrite the
existing configuration, and the message "CONFIG. EXISTS / Delete First"
displays.
70