Color Matching Setup; Display Using Monitor Compensation; Display - Microtek ScanMaker 6400XL Reference Manual

Color Matching Setup

To keep color consistency between the scanner, monitor, and printing device,
ScanWizard Pro applies Kodak CMS (Color management system) with ICC
(International Color Consortium) profile standards. For more information on
Color Management System, see Appendix.
Color Matching Set Up command lets you select the correct ICC profile for
matching with your color monitor and color printer.
When you install ScanWizard Pro, the CMS installer will prompt you to match
your color monitor and printer with the provided list. You may, however, change
and update your existing settings from this command. The default profile for
color monitor is "Generic P22 1.8 Gamma Monitor" and printer will set to

"Display".

Display using monitor compensation

This option controls how the RGB destination data will be displayed. If this
option is unchecked, the RGB data is displayed directly to the monitor. If
checked, RGB destination data will be compensated to the selected monitor type
before it is displayed on the monitor.
Display
This feature allows you select color monitor type that is used for displaying RGB
data. The monitor profile will be applied only when "Display using monitor
compensation" option is checked.
18 Microtek ScanWizard Pro for Windows
Note: If the available
monitor types do not
include the one you
have, select Generic P22
or Generic EBU. These
two profiles are suitable
for most of the monitors.