Microtek ScanMaker 6400XL Reference Manual page 162

Preferences / Default Command
A new Default command has been added to the Preferences menu, allowing users to reset selected
preferences to factory defaults and to recover the original values. As default, all checked boxes are checked,
except for the All check box. The following options are available as general guidelines, where (x) indicates
that a checkbox is checked for that particular preference. Please take note, however, that the default values
may vary depending on the scanner model.
Mac OS X
Preference
Color Space
White & Black Points Setup
CMS Setup
Overview Setup
Prescan Setup
Scan Quality
Interpolation Mode
Default Value
• Advanced (Native)
• Auto Clipping: 0.01% and 0.01%
• Output Levels: 0% and 100%
• Markers: 0% and 100%
• For more details, see the White/Black Points Setup section in the Reference Manual.
• Embed ICC destination profile (x)
• RGB Profile: Kodak s RGB
• CMYK profile: Generic CMYK
• Auto Color Enhancement (x)
• For more details, see the Color Matching Setup section in the Reference Manual
and page 8 of this Addendum. See the next section too for additional information.
• Size: Maximum size
• Keep overview image after quit (x)
• Fast overview (x)
• Warn me if overwriting prescan (x)
• For more details, see the Overview Setup section in the Reference Manual.
• Keep Prescan image(s) after quit (x)
• Prescan image margins: Small
• Prescan image dimension: 75% screen
• Background prescan (x)
• Completion sound: Basso
• For more details, see the Prescan Setup section in the Reference Manual.
• Quality
• For more details, see the More Preferences section in the Reference Manual.
• Bi-linear (Quality)
• For more details, see the More Preferences section in the Reference Manual.
Windows XP
15