Color Cast Tool (Lch Mode Only); The Color Cast Dialog Box - Microtek ScanMaker 6400XL Reference Manual

Color Cast tool (LCH Mode Only)

The Color Cast
adding color cast where proper color cast is lacking to maintain the neutral and
gray balance of an image. You must initially select mode before color casting.

The Color Cast dialog box

Lightness
Handle
Chroma and
Hue Handle
Click to revert to the
74 Microtek ScanWizard Pro for Windows
Color Cast Color Cast
Color Cast Color Cast tool is most useful in eliminating unwanted color cast and
Click to revert to the
default "C&H" custom setting defined
Handle position right after current start
up
Select Color Cast mode
"Remove Cast"
is the default
Define Lightness by adjusting "L"
Handle and observe corres-
ponding "L" value in the edit box.
You can also enter "L" value
directly in the box
Select desired color to add or
remove by dragging the Chroma &
Hue Handle toward desired color
cast; and observe corresponding
"C&H" values on the edit boxes.
You can also directly enter "C&H"
values in their respective edit
boxes
Click to save current custom
(curve) parameters in Color
Cast preset settings