Microtek ScanMaker 6400XL Reference Manual page 86

Selected From color is
enclosed in a sector with
a hollow dot in it.
Resizing From color
sector corresponds to
Delta LCH values
Hollow dot position
reflects C&H From
color values
To move the Fr Fr Fr Fr From
C&H values), press Ctrl
switches into the "Hand" pointer. Drag the sector with the "Hand" pointer to a
new position. Note that movement of the sector is limited to within the vicinity
of the hollow dot. Otherwise you need to reposition the hollow dot which
changes the C&H values.
Click NEW button to specify
additional colors to be altered
78 Microtek ScanWizard Pro for Windows
Drag this "From" slider of Lightness bar to
the desired tone ("L" From color value)
range to be affected by color adjustment
om om
om color sector without changing the hollow dot position (fixed om
Ctrl Ctrl
Ctrl key and click inside the sector. Notice the pointer now Ctrl
To reposition From color sector without moving the
hollow dot, press Ctrl key and click. When the
"Hand" pointer displays, drag sector around the
hollow dot position. Note that the sector can not
break away from the fixed position of the hollow
dot
From color sector
Hollow dot
To color preview (also click here to define To
color)
From color preview (also click here to define
From color)
Enable this check
box to view which
areas on the image
will be affected by
the From color
change. The larger
the sector (Delta
LCH), the wider the
affected area will be
LCH From color edit
boxes. Be sure the
"From" on top of the
column is underscored