Color Matching Setup - Microtek ScanMaker 3600 User Manual

Positives, such as slides.
Negatives, such as the negative film you use for your camera.
The default scan material depends upon the scanner you are using,
and the choices available to you in the Scan Material submenu will
also depend on your equipment.
If you are scanning negatives or positives, make sure you specify
the correct scan material, or you will get inaccurate scanning
results.
To select the scan material:
1. Choose the Scan Material command in the Preferences menu.
From the submenu that appears, select your scan material.
2. Alternatively, you can also click the
(adjacent to the Switch button), and then choose the correct
scan material from the drop-down menu that appears.

Color Matching Setup

Color Matching is an important feature of ScanWizard 5 that
ensures color is displayed consistently — from the initial input stage
when an image is captured by the scanner, to the final output stage
when the image is output to your monitor or printer (through either
the Kodak CMS or Apple ColorSync™ technology). Color matching
was developed to allow an equivalent "mapping" of colors from one
device or from one color space to another, ensuring that no major
color shifts occur in the transference process.
To use the ScanWizard 5 color matching function:
1. Set up the Kodak CMS and Apple ColorSync features correctly
at the time that ScanWizard 5 is installed. For more
information on this procedure, refer to your Kodak or Apple
system documentation.
Scan Material icon