Microtek ScanMaker 6400XL Reference Manual page 87

Likewise, you can also move a defined From
Lightness Lightness
Lightness bar without moving the "From" slider (fixed "L" value). Press Ctrl Lightness Lightness
and click on the lightness range. When the "Hand" pointer displays, drag the
lightness range vertically to its new position. Note that the lightness range can
not go beyond the fixed "From" slider position.
"From" slider
Lightness bar
4. 4. 4. 4. 4. Define your "T Define your "T Define your "To" color setting as follows: Define your "T o" color setting as follows: o" color setting as follows: o" color setting as follows:
Define your "T o" color setting as follows:
a) You need to enable the T T T T T o o o o o LCH column by doing one of the following: : : : :
• Click on the "T T T T T o o o o o " located on top of LCH edit box.
• Directly enter LCH T T T T T o o o o o values in the T T T T T o o o o o LCH edit boxes.
Observe the T T T T T o o o o o on top of LCH edit box being underscored ( T T T T T o o o o o ).
b) Select a T T T T T o o o o o color to change the Fr Fr Fr Fr From
methods-
• Go to your prescan, with the pointer (now a Neutral Eyedropper); pin-
point the T T T T T o o o o o color you wish to turn the specified Fr Fr Fr Fr From
• Click on the color wheel to select the T T T T T o o o o o color. Note that the selected
color spot is highlighted with a Plus (+ + + + + ) sign. Observe color change
result in your "After" thumbnail image or prescan. If not satisfied, try
clicking at other spots of the color wheel.
Click near the arc of the From
selected color. Note that the + + + + + position corresponds to the "T T T T T o o o o o " color
chroma and hue values. Hence, C&H values changes as you click at
new position within the color wheel.
• Directly enter the numerical values of the T T T T T o o o o o color directly in the LCH
T T T T T o o o o o edit boxes.
From From
From color lightness range along the From
To reposition lightness range without moving
the "From" slider, press Ctrl key and click
inside the lightness range. When the "Hand"
pointer displays, drag sector vertically to the
desired new location. Note that the lightness
range can not be moved past the fixed
position of the "From" slider.
"To" slider
om om
om color with one of the following om
From From color sector to increase hue of the From
From
Reference: The Settings Window
Ctrl Ctrl
Ctrl key Ctrl
om om
om om color into.
79