Microtek ScanMaker 6400XL Reference Manual page 88

5. 5. 5. 5. 5. Adjust tonal range (
80 Microtek ScanWizard Pro for Windows
Adjust tonal range ( Adjust tonal range (T T T T T o o o o o "L" value) of the r Adjust tonal range (
Adjust tonal range (
the following methods: the following methods:
the following methods: the following methods: the following methods:
• Drag the "To" slider (black arrowhead with "plus" sign) of the Lightness
bar to the desired tone.
"L" "L" numerical value directly into the "L" edit box under T T T T T o o o o o "L"
• Enter the "L" "L"
column.
If you are not satisfied with the resulting image on preview, you can always
go back to redefined your Fr Fr Fr Fr From
From From color setting environment, press Alt From
From From
being underscored) and perform From
the T T T T T o o o o o color setting is again enabled.
"To" slider positioned at
83.9 tonal range (the
target tonal range for
the specified From
color tonal range)
From lightness range
(the tonal range within
the selected From
color to be subjected to
tonal change)
"L" value) of the r "L" value) of the r esulting color with either of esulting color with either of
"L" value) of the resulting color with either of "L" value) of the r esulting color with either of esulting color with either of
om om
om om color settings . To temporarily go back to
Alt key (watch From Alt Alt
Alt
From color adjustment. Release Alt From From
From
"From" slider positioned at 36.8
Lightness Lightness
Lightness Lightness
From color setting From From
From
Alt key and Alt Alt
Alt