AUX Controller: Connection and Placement
Connect the AUX Controller to allow the Integrator Box to operate your AUX device.
Connect the AUX Controller to the AUX CONTROL cord on the LST-4600A.
1
Place the AUX Controller under and in front of the AUX device. The AUX Controller must extend just out in front
2
of the infrared sensor on the AUX device.
ote
If the infrared sensor is not marked on your AUX device, shine a flashlight into the front panel of the AUX device to
locate the sensor.
DVD (Front View)
STB Connection Panel
AUX Controller
IR Sensor
DVD
1/2" to 1"
(Side View)
9