LG LST-4600A Installation And Setup Manual page 48

LT2000 QuickSet Programmer (Continued)
Typical Clone on-screen menus
THE CLONE HAS CONTROL OF THE TV
THE CLONE IS VERSION
THE TV IS VERSION
THE SW IS REVISION
CLONE CLOCK= XX:XX
TV CLOCK= XX:XX
-PRESS ANY KEY TO CONTINUE.
-DISCONNECT CLONE WHEN DONE.
C. Learn Setup from Master LG Integrator
Box or TV
Press 1 to select the "Learn From TV" option, then
press ON/OFF, POWER, or ENTER to go to the
Memory Bank Selection Menu.
Pick the Memory "Bank" (1, 2, 3, or 4) you want to store
this master LG Integrator Box's or TV's setup in by
pressing either Channel key repeatedly to pick Memory
1, 2, 3, or 4. (If you choose a Memory "Bank" that
already has a master LG Integrator Box's or TV's setup
already in it, it will be overwritten by this master LG
Integrator Box's or TV's setup.) Once the Clone memory
bank is selected, press ON/OFF, POWER, or ENTER.
The Clone memory bank you have selected will be
shown. Press ON/OFF or POWER to begin copying the
master LG Integrator Box's or TV's setup.
Ca. Set the Clock (Optional)
Set the time on the Master LG Integrator Box's or TV's
Clock. (If the time has already been copied from another
LG Integrator Box's or TV's into the Clone programmer,
you can set the master LG Integrator Box's or TV's clock
by copying the time from the Clone programmer.) The
Clone Programmer can copy the current time to both a
master LG Integrator Box's or TV's and to the Clone's
internal clock; accurate to within one minute. (Another
reason that the Clone programmer should be equipped
with fresh, high-quality alkaline batteries is for it to keep
the time as accurately as possible.)
Since the Clone Programmer's time cannot be set
directly, the time needs to be copied from an LG
Integrator Box or TV equipped with MPI input capability.
Once the time is copied to the Clone programmer, the
current time can then be transferred to another LG
Integrator Box or TV. (This can be a master LG
Integrator Box or TV, which has already had the features
set up.)
48
CLONE SELECTION MENU
XX (1) LEARN FROM TV
XX (2) TEACH TO TV
XX (3) SET CLONE CLOCK FROM TV
(4) SET TV CLOCK FROM CLONE
(5) DISPLAY TV SETUP
(6) DISPLAY CLONE SETUP
- TO CHANGE MENU ITEMS, PRESS
CHANNEL KEYS OR DIGITS.
- TO EXECUTE ITEM, PRESS ON/OFF,
POWER, OR ENTER
D. Teach Master TV's Setup to Other LG
Integrator Box or TV
Once learning is complete, remove the MPI cable from
the master LG Integrator Box or TV and connect it to
the LG Integrator Box or TV that you want to copy the
master LG Integrator Box's or TV's setup to. With the
"TV is Controlled by Clone" message displayed, press 2
or use either Channel key to go to the "Teach to TV"
option, press ON/OFF, POWER, or ENTER. Follow on-
screen instructions to transfer the Setup and other infor-
mation to the "Learning" LG Integrator Box or TV. After
the "Teach to TV is Complete" message is displayed,
press any key to return to the Clone menus option, then
press ON/OFF, POWER, or ENTER. If finished, detach
the MPI cable from the LG Integrator Box or TV.
E. Disconnect Cloned LG Integrator Box or
TV Power for 5 Seconds
Unplug the power cord of the newly "Cloned LG
Integrator Box or TV" from the power outlet for about 5
seconds to activate the newly copied setup.