Connections Panel - LG LST-4600A Installation And Setup Manual

Connections Panel

DIGITAL AUDIO OUT (OPTICAL)
Connect to digital (optical) audio equipment.
VIDEO OUT 1, 2
Connect to TV/Monitor with composite video inputs.
COMPONENT OUTPUT
Connect to TV/Monitor with YPbPr inputs.
RGB OUT
Connect to TV/Monitor with RGB
Select either YPbPr or RGB/DVI OUT
depending on how you connect the Integrator
Connect DVI-HDTV compatible HD monitor here.
Connect Integrator Box configuration device (PC) here.
6
DISPLAY CONTROL JACK
Connect RS232 9-pin connector on the rear of the plasma panel here
input.
TYPE Selector
Box to the TV.
DVI-HDTV OUTPUT PORT
CALIBRATION PORT
AUX CONTROL CONNECTOR
Connect the AUX controller cable here.
Plug viewing device power cord here.
SIGNAL INPUT
Connect source signal to this input jack.
M.P.I. INPUT PORT
Connect clone programmer to this port.
REMOTE CONTROL IR
SENSOR CONNECTOR
Connect the remote IR sensor
here.
AC POWER OUTPUT
Integrator Box AC POWER INPUT
Plug Integrator Box power cord here.