LG LST-4600A Installation And Setup Manual page 50

Troubleshooting (Continued)
Some quick and easy tips to resolving problems
Symptoms
Power
No Power.
No Source image.
Remote Control
Remote doesn't work.
Caption/Text Problems
No Closed Captions or
Text.
Captions appear when
sound is muted.
Parental Control Problems
Protected/blocked message
shows on-screen.
TV-PG programs blocked.
Foul language is heard.
50
Possible Cause(s)
• AC Power Cord not con-
nected or power outlet
doesn't work.
• Source turned off.
• Source not selected.
• Remote not in TV mode.
• TV software functioning.
• Not aimed at remote sen-
sor.
• Remote too far from
Integrator Box or IR path
to Integrator Box blocked.
• Weak batteries.
• Wrong battery polarity.
• Too much light in room.
• Not available on pro-
gram.
• Not turned on.
• CC on Mute selected.
• Program content is
restricted.
• Don't know password.
• TV-PG set to be blocked.
• Foul language not
blocked.
• Program is not rated.
Possible Solution(s)
- Connect power cord. Try a different power outlet.
- Local power failure?
- Turn source equipment on.
- Select source.
- Press TV to put remote into Integrator Box mode.
- Wait until software function is complete.
- Point remote at Integrator Box IR receiver.
- Move remote closer to Integrator Box or darken
room.
- Remove obstructions.
- Replace batteries.
- Check that "+" and "-" match in battery compartment.
- Dim room light.
- Check local TV listings to see if available on broad-
cast.
- Relocate over-the-air antenna.
- Try a different channel with Closed Captions or Text.
- Pick a Closed Caption or Text option and turn
Captions on.
- Set Captions option to off.
- Key-in password and turn Lock On/Off (restrictions)
Off.
- Set to Off in Lock On/Off menu.
- Tune to channel without Parental Control "Content"
restrictions.
- Wait until restriction time expires.
- Reset restrictions to PG-13 so TV-PG programs will
appear.
- Restrict Language in Content options on Parental
Control menu.
- Restrict or block programs with no ratings.