Ez Channel Scan (Channel Search) - LG LST-4600A Installation And Setup Manual

EZ Channel Scan (Channel Search)

Automatically finds all channels (both analog and digital) available through the antenna/cable input, and stores all
the active channels on the channel list. Inactive or weak channels may not appear on the list. The channel list creat-
ed here can be seen in the Surf List/Ch. Edit menu.
To search for the available channels:
Press the MENU button on the Remote Control to display the on-screen menu.
1
Select the Setup menu by pressing "ENTER".
2
EZ Channel Scan will be automatically highlighted.
3
Move the highlight to the right with "ADJ 2 2 " to display the channel search menu box.
4
Select "Start" button and press "ENTER". The scrolling yellow bar will indicate progress while scanning
5
the channels. After the scanning process begins, "Start" will change to "Next". If you press "Next", the
scanning of the current signal source will be ignored and the scanning of the next signal source will
proceed.
After channel scanning is complete, the channels found will be stored.
6
Press "ENTER" after the channel search is complete.
7
Press the "MENU" button on the Remote Control to exit the menu.
8
20