Glossary - LG LST-4600A Installation And Setup Manual

Glossary

A list of definitions for some of the words found in this installation guide.
75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider. The end looks like a
hex-shaped nut with a wire sticking through the middle. It screws onto the threaded jack on
the back of the Integrator Box.
300 TO 75 OHM A small device that connects a two-wire 300 ohm antenna to a 75 ohm RF jack.
ADAPTER They are usually about an inch long with two screws on one end and a round opening with a
wire sticking out on the other end.
A/V CABLES Audio/Video cables. Three cables bunched together—right audio (red), left audio (white), and
video (yellow). A/V cables are used for stereo playback of videocassettes and for higher qual-
ity picture and sound from other A/V devices.
A/V DEVICE Any device that produces video or sound (VCR, DVD, cable box, or television).
ADDED Lets you add new channels to list that you'll scroll through using CH (Channel) Up/Down.
AMPLIFIER An electronic device that amplifies sound from a television, CD player, VCR, DVD, or other
Audio/Video device.
ANTENNA The physical receiver of television signals sent over the air. A large metal piece of equipment
does not always have to be visible to be using an antenna.
AUTO PROGRAM Auto Program has the Integrator Box automatically find all the channels available in your
area.
BLANK Channels that are Blanked will not have Video (shows a blank screen); only audio, if present
on channel.
DELETED Lets you remove channels from the list that you'll scroll through using CH (Channel)
Up/Down.
INPUT Refers to the input jack that receives a signal from a TV, VCR, or other Audio/Video device.
JACK A connection on the back of a TV, VCR, or other Audio/Video device.
MONO SOUND Mono (monaural) sound is one channel of sound. On more than one speaker, all the speak-
ers play the same audio.
OUTPUT Refers to the output jack that sends a signal out of a VCR, DVD, or other A/V device.
2ND AUDIO Second Audio Programming (SAP) is another, separate, audio channel available with some
PROGRAMMING/SAP programming.
Choosing SAP often refers to listening to audio in another language, such as Spanish or
French.
SIGNAL Picture and sound traveling through a cable, or over the air, to your Integrator Box.
STEREO SOUND Stereo (Stereophonic) sound refers to audio that's divided into right and left sides.
TUNER Device that picks up the broadcast signal and turns it into picture and sound.
XDS Extended Data Service: Additional program information included on the signal provided at the
discretion of the broadcaster.
53