Detailed Descriptions Of Installer Menu - LG LST-4600A Installation And Setup Manual

Detailed Descriptions of Installer Menu Items (Continued)
17-I ALARM
Gives you the option of making the alarm function avail-
able to the user. Set to 1, alarm function is available to
user. Set to 0 to disable the Alarm function.
Note: Clock must be set in order to set the Alarm.
18-I NOT USED
19-I NOT USED
20-I FEATURE LEVEL
Default set to 1 for LG IR Remote Control operation. Set
0, PLBL for LG Private Label IR Remote Control opera-
tion. Set to 2 for NEC IR Remote Control operation.
Warning: Do not set to "0" or Remote will not control the
Integrator Box.
21-I V-CHIP
Set to 1 to activate V-Chip (Parental Control); have it
available to user to filter or control or restrict program-
ming content. Set to 0 to turn V-Chip feature off, not
available to user; no programming restrictions can be
set.
22-I MAX BLK HRS (Maximum Block Hours)
Set to 0 to 99 for the maximum V-Chip (Parental
Control) block hours. Default is 12 blocking hours.
23-I CAPTION LOCK
If set to 1, caption state is retained through power cycle.
24-I NOT USED
25-I NOT USED
26-I NOT USED
27-I NOT USED
28-I CH. OVERRIDE (Channel Override)
If set to 0, limits direct access tuning to favorite channel
list.
29-I OLD OCV (On Command VideoTM)
If set to 1, changes MPI operation for OCV.
30-I ACK MASK
If set to 1, changes MPI for some OCV boxes.
31-I POLL RATE
Selects poll rate for MPI. Step size of 16 MS.
32-I TIMING PULSE
Sets baud rate for MPI. Step size of 4uS.
44
33-I NOT USED
34-I NOT USED
35-I COMPPORT EN. (Compport Enable)
Set to 1 to enable the Plasma DVI input.
Set to 0 to disable the Plasma DVI input.
36-I NOT USED
37-I REAR Y/C EN. (Rear S-Video Enable)
Set to 1 to enable the Plasma S-Video input.
Set to 0 to disable the Plasma S-Video input.
38-I YPrPb EN. (Y Pr Pb Enable)
Set to 1 to enable the Plasma Component Video input.
Set to 0 to disable the Plasma Component Video input.
39-I REAR AUX EN. (Rear AUX Enable)
Set to 1 to enable the Plasma AUX (Video) input.
Set to 0 to disable the Plasma AUX (Video) input.
40-I NOT USED
41-I NOT USED
42-I NOT USED
43-I NOT USED
44-I NOT USED
45-I NOT USED
46-I STRT AUX SRCE (Start AUX Source)
Sets the starting AUX source.
Start source if start channel = 0, 1 = Video, 2 = S-Video,
3 = DVI, 4 = RGB, 6 = Component
47-I AUX STATUS
Controls MPI status channel response for AUX inputs
Set to 1 for MPI AUX source to be reported as a chan-
nel number instead of channel 0.
Set to 0 to disable AUX identification change.
48-I NOT USED
49-I NOT USED
50-I NOT USED
51-I NOT USED
52-I NOT USED