Table of Contents
Advertisement
Installer Menus
Use the Installer Menu to set up or change operational settings. See detailed descriptions of the Installer items on
the following pages.
Accessing the Installer's Menu
Installer's menu items can be accessed by using the Installer's Remote Control. To enter the installer's menu, press
and release the MENU key repeatedly until the MENU key doesn't work any more, then press 9,8,7,6, then ENTER. To
exit the Installer's Menu, press ENTER again. Any changes you make will be stored in nonvolatile memory.
The Installer's menu opens with item 0-I, INSTALLER. SEQ. Use the SELECT key to sequence through the available
menu items. Or, access an item directly by entering the line number, then pressing MENU. For example, to access
the Sleep Timer option which is on line 15-I, press 15, then MENU. To change a setting use the Left/Right ADJ keys.
Using the Installer's Menu
Items 0-I - 113-I are immediately accessible only upon entering the Installer's
Menu. Their numbers, descriptions, ranges, factory default settings, and a place
for listing any changes made on-site are given below and on the following pages.
A Factory Menu that is intended for qualified service technicians only, is not
shown. Normally Factory menu items do not require adjustment.
XX-F Menu Items (Not shown here) are service-type adjustments
and only qualified technicians having specialized test equipment
should access them.
ote
Some Installer menu items may be revised or other items added for quality improvement in the future. At the printing
of this installation guide, the installer menu items were as follows.
Installer Menu Items 01-I through 113-I
Menu Item
Function
00-I
INSTALLER SEQ
01-I
POWER MANAGE
02-I
AC ON
03-I
BAND/AFC
04-I
STRT CHANNEL
05-I
CHAN LOCK
06-I
GHOST CH.
07-I
STRT VOLUME
08-I
MIN VOLUME
09-I
MAX VOLUME
10-I
MUTE DISABLE
11-I
NOT USED
12-I
NOT USED
13-I
NOT USED
14-I
NOT USED
15-I
SLEEP TIMER
16-I
EN. TIMER
17-I
ALARM
18-I
NOT USED
19-I
NOT USED
20-I
FEATURE LEVEL
21-I
V-CHIP
22-I
MAX BLK HRS
40
Value Range
Default Value
0-3
0
0-7
0
0/1
0
0-3
0
0-125, 255
255
0/1
0
0/1
0
0-63, 255
255
0-63
0
0-63
63
0/1
0
0/1
1
0/1
1
0/1
1
0-2
1
0/1
1
0-99
12
LST-4600A INSTALLER MENU
000 INSTALLER SEQ 000
SN: XXXXXXXXXXXXX
UPN: 022-119-114-021
PTC V0.08 112 STB VO. 14.00
Brief Description of Function and Comments
Leave default set 0.
Sets number of hours of no activity before auto shut off.
Set to 1 to enable auto turn on at power up.
Tuning band.
Channel at turn-on (255 last Channel).
When set to 1, cannot tune from current channel.
Set to 1 to enable Ghost Channel display.
Volume level at TV turn-on (Set 255 to retain last volume level).
Minimum volume setting.
Maximum volume setting.
Set to 1 to disable mute function.
Set to 1 to enable Sleep Timer.
Set to 1 to enable On/Off Timers.
Set to 1 to enable Alarm.
Leave default set to 1
Set to 1 to enable V-Chip
Sets number of Parental Control blocking hours.
Typical Installer Menu
Advertisement
Table of Contents
Troubleshooting
