LG LST-4600A Installation And Setup Manual page 45

Detailed Descriptions of Installer Menu Items (Continued)
53-I DIS. CH-TIME (Disable Channel Time Display)
Set to 1 to disable the Channel-Time display. Channel-
Time display will not appear.
Set to 0 to enable the Channel-Time display.
54-I NOT USED
55-I NOT USED
56-I NOT USED
57-I NOT USED
58-I NOT USED
59-I NOT USED
60-I NOT USED
61-I NOT USED
62-I NOT USED
63-I NOT USED
64-I NOT USED
65-I NOT USED
66-I NOT USED
67-I NOT USED
68-I NOT USED
69-I EN. CH-T COL. (Enable Channel Time Color)
Set to 1 to enable custom color for the Channel-Time
display.
Set to 0 to disable custom color for the Channel-Time
display.
70-I FOR. CH-TIME (Channel-Time Display
Foreground Color)
0 = Black 3 = Yellow
1 = Red 4 = Blue
2 = Green 5 = Violet
Note: If foreground and background color are the
same, menu background is transparent.
71-I BCK. CH-TIME (Channel-Time Display
Background Color)
0 = Black 3 = Yellow
1 = Red 4 = Blue
2 = Green 5 = Violet
Note: If foreground and background color are the
same, menu background is transparent.
72-I NOT USED
73-I NOT USED
74-I NOT USED
75-I NOT USED
76-I NOT USED
77-I NOT USED
78-I UPN MSB
User programmable number, most significant byte read-
able by MPI command. (Line - Day)
79-I UPN MSB-1
User programmable number, most significant byte-1
readable by MPI command. (Week)
80-I UPN MSB-2
User programmable number, most significant byte-2
readable by MPI command. (SN - HIGH)
81-I UPN LSB
User programmable number, least significant byte read-
able by MPI command. (SN - LOW)
82-I CHKSUM ERROR
If set to 0, does not check checksum on MPI async
port, SPI always checked.
83-I HANDSHAKE TIME
Lengthens MPI handshake response timeout.
Timeout = 25.5MS + (25.5MS * HANDSHAKE TIME)
84-I PERMANENT BLK
Makes V-Chip lockout permanent.
85-I NOT USED
86-I NOT USED
6 = Cyan 87-I REAR RGB EN. (Rear RGB Enable)
7 = White RGB input enabled
88-I NOT USED
89-I NOT USED
90-I NOT USED
6 = Cyan
7 = White 91-I NOT USED
92-I NOT USED
93-I NOT USED
94-I NOT USED
45