LG LST-4600A Installation And Setup Manual page 46

Detailed Descriptions of Installer Menu Items (Continued)
95-I NOT USED
96-I NOT USED
97-I NOT USED
98-I NOT USED
99-I NOT USED
100-I VIDEO INTERFAC
There are 4 possible settings for this option:
0 = Composite 1 = Component
2 = RGB 3 = DVI
101-I NOT USED
102-I ATSC BAND
There are 5 possible settings for this option:
0 = Broadcast 1 = CATV
3 = IRC 4 = Same as NTSC
103-I ATSC TUNE MODE
There are 2 possible settings for this option:
0 = Virtual 1 = Physical
104-I START MINOR CH
0 = NTSC, Not 0 = Minor Ch
105-I VID OUT FORMAT
There are 4 possible settings for this option:
0 = 1080i 1 = 720p
2 = 480p 3 = 480i
106-I ASP RATIO LOCK
There are 2 possible settings for this option:
0 = Default ratio on power cycle.
1 = Retains aspect ratio on power cycle.
107-I BANNER
Bit 0 (0=Small Banner, 1=Full Banner)
Bit 1 (0=Normal, 1=Suppress default banner info.)
108-I PANEL COM
0=1200 1=2400
3=115200 4=IR Blaster
109-I PANEL HANDSHAKE
0=No Handshake, 1=Handshake.
110-I PANEL DELAY
Sets the panel delay time.
111-I PANEL VOL PRE
Preset Panel volume to achieve the same volume levels
as other systems.
46
112-I PANEL STRT VOL
Panel start volume when on Aux. input.
113-I FACT DEFAULT
There are 2 possible settings for this option:
0 = Normal.
1 = Loads presets to all of above.
2 = HRC
2=9600