Sorter - Kyocera FS FS-1920 Operation Manual

SO-60 Sorter
Install the option sorter on top of the printer. It is equipped with five sorter
trays, with a capacity of 200 sheets each. There are three modes in which
printouts can be received: the sorter mode, the collator mode, and the mail
box mode (for details about the modes, see
Operation Guide.
The following installation procedure explains how to install the sorter
when the option paper feeder (PF-60) and duplexer (DU-61) have already
been installed.
1
Unpack the sorter and place it on its side.
2
Remove the tapes from the sorter.
3
Unfold the two attachment legs of the sorter.
Legs
4
Turn off the printer and disconnect the power cord and printer cable.
A-15
Tape
Installing Option Units
KX Printer Drivers
Tape