Kurzweil K2600 Musician's Manual page 514

DSP Functions
The DSP Functions
Bass Tone Control (PARA BASS)
This is a two-stage function, with control-input pages for frequency and amplitude. These pages
are the same as those for frequency and amplitude in PARA EQ. On the frequency control-input
page, youÕll set the cutoff frequency. For notes above this frequency, the amplitude setting has a
diminished effect. On the amplitude control-input page, youÕll set the amount of cut or boost
thatÕs applied to notes below the cutoff frequency. ThereÕs a gradual increase in the bass
response for each successively lower note. The location of the cutoff frequency will change
somewhat as you change the amplitude settings, although the value for the Adjust parameter on
the frequency control-input page will not reßect the change.
16-30
10 100
16
14
12
10
8
6
C 2
4
2
0
10 100
20
18
15
10
5
6
0
-6
-5
-10
-18
-15
-20
Frequency in Hertz
1000 10000
Gain = 12 dB;
cutoff frequency
from C 2 to C 4
C 4
Frequency in Hertz
1000 10000
Cutoff frequency = C 3;
gain from -18 to 18 dB
100000
100000