Soft Buttons In The File List Dialog - Kurzweil K2600 Musician's Manual

Disk Mode
File List Dialog
While in this dialog, pressing the Chan/Bank buttons will scroll the Þle list either forward or
backward by ÒpagesÓ of 5 entries. It is often easier to scroll the list this way when looking to see
if a particular Þle is present in a directory.

Soft Buttons in the File List Dialog

Use the Select soft button for multiple Þle selection in the Load, Delete, and Move functions. In
the display below, there are two Þles selected (DOORS.K26 and FLUTE.K26), as indicated by
the asterisk (*) following their Þlenames. If you pressed OK in the following display:
Dir:\||||||||||||Sel:2/23||||Index:|||3|
|||||||||||||||||AXM||||||.K26||||122K||
|||||||||||||||||CHIME||||.K26|||||42K||
||||File|to|load:DOORS||||.K26*||3456K||
|||||||||||||||||JUNE27|||||||(dir)|||||
|||||||||||||||||LONGSMPS|||||(dir)|||||
|Total:21034K||||FLUTE||||.K26*||||.5K||
Select||Root||Parent||Open|||OK|||Cancel
the Þles DOORS.K26 and FLUTE.K26 would be loaded.
The Select button will toggle the selection, meaning that if you press Select on a given Þle, the
asterisk will go on if it is currently off, and vice-versa. Selecting can be done for Þles only, not for
directories. You can select as many Þles as you wish using the Select button. There is also a way
to select all Þles at once, or clear all Þle selections at once, using a double-press of the cursor
buttons:
¥ Left/Right cursor double-press: Select All Files
¥ Up/Down cursor double-press: Clear All Selections
Pressing either the Left or Right cursor individually performs a separate function for Þnding
directories, described below.
You can select multiple Þles only within a single directory. Changing directories clears any
selections.
Once you have selected one or more Þles, press OK to perform the disk function (in this
example, Load) on all Þles marked with an asterisk, regardless of whether theyÕre visible in the
display. If there are no Þles marked with an asterisk, the function operates only on the
highlighted Þle.
The Root soft button returns you to the top-level directory. If the display is already at the root
directory (as indicated by the Dir Þeld on the top line of the display) the only effect of pressing
Root will be to reset the Þle index to1 if there are Þles in the directory.
The Parent soft button moves you up one level in the directory hierarchy. If the display is
already at the root directory, this button has no effect.
The Open soft button performs a different operation depending on the disk function and the
type of the currently highlighted Þle or directory (or selected Þles). In all disk functions,
pressing Open on a directoryÑindicated by (dir) after the ÞlenameÑwill open that directory
and display its Þle list.
When you Þrst open a directory for viewing, the index is 1 (the Þrst Þle in the list). The K2600
remembers the index of the previous directory you were in before you pressed Open, so if you
13-10