Kurzweil K2600 Musician's Manual page 202

Kurzweil k2600: user guide
Hide thumbs Also See for K2600:
Table of Contents

Advertisement

Basic Effects Mode
A Tour of Effects Mode
to go into the FX Preset Editor, then press PARAM3, youÕll see that the Left and Right LFO1
Rates are also under FXMod control.
EditFXPreset:PARAM3|||||Dual|Chorus|2|||
L|LFO1Rate:FXMod||||R|LFO1Rate:FXMod|
L|LFO2Rate:|0.50Hz||R|LFO2Rate:|0.50Hz
L|LFO3Rate:|0.50Hz||R|LFO3Rate:|0.50Hz
L|LFO1Dpth:9.5ct||||R|LFO1Dpth:9.5ct
L|LFO2Dpth:10.0ct|||R|LFO1Dpth:10.0ct
L|LFO3Dpth:5.0ct||||R|LFO1Dpth:5.0ct
<more||PARAM1|PARAM2|PARAM3|PARAM4|more>
Exit out of the FX preset and the studio, to the setupÕs KDFX page (see the diagram on
page 9-23). Here we see that on FXBus2, L Fdbk Lvl has a starting value of 0%, and will change,
using MIDI Controller 26 (Slider F), up to 120%.
Press FXMOD2 to go to the next page of FXMods, and youÕll see the same slider changing the
R Fdbk Lvl, only in this case the Depth is -120%, meaning the feedback on this channel will be
out of phase with the main signal.
EditSetup:FXMOD2||||||||||||||All|Zones||
Bus:|Param:|||||Adjust:||Source:||Depth:
FX2||R|Fdbk|Lvl|0%|||||||MIDI26|||-120%
FX2||L|LFO1Rate||0.50Hz||MIDI25|||8.25H
FX2||R|LFO1Rate||0.52Hz||MIDI25|||8.25H
FX2||Aux|Lvl||||-15.5dB||MIDI27|||15dB
FX3||L|Feedback|17%||||||MIDI24|||120%
<more||KDFX|||FXMOD2|FXMOD3|FXMOD4|more>
Further down the FXMOD2 page are the assignments to the LFO rates: MIDI Controller 25
(Slider E) is assigned to the left and right LFO1 Rates, with minimum values of 0.50 and 0.52 Hz,
respectively, and maximum change of 8.25 Hz. Set the feedback level high and you can really
clearly hear the LFO rate changing.
Finally on this bus, MIDI Controller 27, Slider G, controls the Aux Level send, thereby
determining how much reverb will appear on the signal. We also used Slider G on the KDFX
page to control the wet/dry mix for FXBux1. There are no limits to how many FXMods a single
Source can be assigned to. (In fact, there are also no limits on how many different Sources can be
assigned to the same parameter, and you may Þnd uses for that feature somewhereÑbut not
here.)
9-24

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

K2600sK2600xK2600xsK2600rK2600rsK2600 aes

Table of Contents