Total; Quick Scrolling To Subdirectories - Kurzweil K2600 Musician's Manual

return to that directory by pressing Parent, the index changes accordingly. This index is
remembered for one level down, and therefore is useful when stepping through a list of
subdirectories from a single directory level.
In the Load function, pressing Open for a standard .K26 Þle will start the Load Object feature.
This allows selected individual objects from the Þle to be loaded into the K2600. If Open is
pressed on a macro Þle (.MAC extension), then individual Þle entries within a macro Þle can be
selected for loading.
For all other functions, if Open is pressed when a .K26 or a .MAC Þle is highlighted, the object
Þle or the macro Þle will be opened for viewing. For example, pressing Open on a .K26 Þle while
in the Delete function will display the objects within the Þle in a scrollable list, however no
delete action will be possible on the individual objects.
Pressing the OK soft button will cause the K2600 to proceed with the selected function. After
pressing OK, there may be further dialogs such as bank speciÞcation (for the Load function),
conÞrmation (for Delete), or name entry (for Rename). One exception to this is in the Load
function; when a directory is highlighted, pressing OK is the same as pressing Open (it displays
the contents of the highlighted directory).
The Cancel soft button exits the Þle list dialog, completing the disk function with or without any
operation taking place. The K2600 returns to the Disk-mode page. Pressing the Exit button will
do the same thing as Cancel.

Total

The total size of all the Þles in the directory is indicated at the bottom left of the Þle display
above the soft buttons. This total represents only the disk space used by the Þles in the
directory being viewed. The K2600 includes a free space utility that indicates how much space is
being used on the current disk. Also, there is a List utility that can be used to calculate the size of
all Þles within a selected directory subtree. These functions are described in the section called
Disk Utilities on page 13-60.

Quick Scrolling to Subdirectories

It is sometimes difÞcult to locate a subdirectory entry in the Þle list for the current directory, if
there are many Þles in the current directory. To make this easier, individually pressing either the
Left or Right cursor buttons will set the Þle index to the previous or next directory (respectively)
in the current directory list. The index will wrap around the beginning or end of the list, so that
repeated presses of either cursor button will cycle through all of the subdirectories. If you have
many subdirectories, you can scroll through them all very quickly using this method.
For example, given the following Þle list display:
CYMBALS||||||(dir)|||||
DOGS|||||.K26||||122K||
DOORS||||.K26*||3456K||
E4PROG|||.K26|||||10K||
LONGSMPS|||||(dir)|||||
LUTE|||||.K26*||||.5K||
Disk Mode
File List Dialog
13-11