Soft Buttons In The Save Selection Dialog; Saving Individual Objects - Kurzweil K2600 Musician's Manual

Disk Mode
Saving Files
When youÕre loading these split Þles, they must be inserted in the same sequence as they were
saved. When the K2600 has loaded the contents of the Þrst disk, it will prompt you to insert the
second disk, and so on. Make sure to label your disks as soon as you save to them, so youÕll keep
them in the correct order.

Soft Buttons in the Save Selection Dialog

The meaning of the soft buttons in the ÒSave selectionÓ dialog is as follows:
Export
Macro
Object
NewDir
OK
Cancel
Export (page 13-71), Macro (page 13-43), and NewDir (page 13-12) are all explained elsewhere
in this guide. This section will describe the process of saving K2600 objects into K2600 format
disk Þles.

Saving Individual Objects

You can select any group of objects in the K2600Õs RAM for saving into a single Þle.To save
individual objects, from the above dialog, press Object. The K2600 will display a scrollable list
of all the objects in RAM, very similar to the display for the Load Object feature (described
previously):
Func:SAVE|||||Sel:0/8||||||||Index:|||1
|||||||||||||||||||||||||||||||||||||||
|||||||||||||||||||||||||||||||||||||||
Sample||500|Lo|Vocal||||||||A|3S|||250K
Sample||501|Hi|Vocal||||||||G|4S|||179K
Keymap||500|VocalsMap||||||||||||||176|
Program|500|Dry|Vocals|||||||||||||270|
Select||Next|||Type|||Multi||OK||Cancel
The procedures for saving objects are essentially the same as the procedures described on
page 13-15 for loading objects.
13-26
Save a sample or a song in an exported Þle format (that is, AIFF, WAVE,
MIDI Type 0 or Type 1). This feature is described in Importing and Exporting Data
Using Standard File Formats on page 13-71
Save entries from the current macro table as a macro Þle (.MAC). This soft button is
displayed only if macro Þle recording is on.
Save selected objects from the K2600Õs RAM.
Create a new directory on the current disk, and return to this dialog afterwards.
This is described previously in Creating Directories on page 13-12.
Save all the objects from the highlighted bank (for example, 200...299), and
optionally also save dependent objects.
Exit from the Save function.