Kurzweil K2600 Musician's Manual page 196

Basic Effects Mode
A Tour of Effects Mode
On this bus is an FX preset called Ptc+Flg+Dly145BP, which uses a combination algorithm that
has a pitch shifter, a ßanger, and a delay all rolled into one. The 145BP part refers to the fact that
the delay times are based on a tempo of 145 BPM,
As you play the guitar sound, the arrow next to FX2 ßashes, and it keeps on ßashing as long as
the various feedback delays are sounding. It doesnÕt ßash when you play on the lower part of
the keyboard.
This FX preset uses 2 PAUs. Along with the 1 PAU in use on FXBus 1, this makes 3 of the 4
available PAUs accounted for, so the Free parameter has a value of 1.
The output conÞguration of this FXBus has the signal going to the Aux bus attenuated by -
9.5 dB, and going to the main Mix bus at unity gain.
The other two FXBuses are empty, which you can conÞrm by pressing the Chan/Bank buttons a
few times.
Inputs
Now letÕs look at the inputs to the FXBuses. Press the INPUT soft button, and see this page:
EditStudio:INPUT||||||||||||<>Input:||A|
SP
||A||LoShelf||HiShelf||FXBus1||None
|||G:12.0dB|G:0.0dB||Lvl:0.0dB|
|||F:370Hz||F:1000Hz|Pan:0%||||
|||||||||||||||||||||Wid:100%||
<more||INPUT||FXBUS||AUXFX||OUTPUT|more>
Input A carries the electric piano, coming from the programÕs KDFX-A outputs. Play on the
piano part of the keyboard, and the arrow next to A ßashes.
This input is conÞgured to be stereo. It has a large bass boost: 12.0 dB of everything at 370 Hz
and below, which adds a strong low-frequency emphasis to the signal being ring-modulated. Its
signal is being sent only to the Þrst FXBus. The stereo separation (Width) of the signal is at
maximum.
Use the Chan/Bank Up button to go to Input B.
EditStudio:INPUT||||||||||||<>Input:||B|
SP
||B||LoShelf||HiShelf||FXBus2||None
|||G:0.0dB||G:12.0dB|Lvl-5.0ddB
|||F:123Hz||F:3136Hz|Pan:0%||||
|||||||||||||||||||||Wid:100%||
<more||INPUT||FXBUS||AUXFX||OUTPUT|more>
This is the distorted guitar, coming from the programÕs KDFX-B outputs. It is also stereo. The
incoming signal has a strong treble boost on it. It is sent directly to FXBus2 at -5 dB below unity
9-18