Other Convenient Items; I Your First Contact; D Getting Started - Icom IC-703 Instruction Manual

3. Other convenient items

Headphones:
") mono jack for operation without
1
A 3.5(d) mm ( ⁄
4
using the internal or external speakers. Perfect for op-
eration without disturbing others in the room.
Front panel
HEADPHONES
PHONES ∫
SPEAKER √
Select 'PHONES' with the
[ P H O N E S / S P E A K E R ]
switch on the back of the
front panel.
I Your first contact
Now you should have your IC-703 installed in your
shack, and like a kid on his birthday, you are probably
excited to get on the air. We would like to take you
through a few basic operation steps to make your first
"On The Air" an enjoyable experience.
D D Getting started
1. Before powering up your radio, you may want to
make sure the following controls are set in the fol-
lowing positions:
• [AF] : Commonly referred to as the vol-
ume: fully counter clockwise.
• [RF/SQL] : The control for the RF Gain and
Squelch circuits: 12 o'clock.
• [SHIFT] : Shifts the IF center frequency:
12 o'clock
QUICK REFERENCE GUIDE
External Speaker:
") mono jack for operation with an ex-
1
A 3.5(d) mm ( ⁄
8
ternal speaker. (Input impedance: 8 Ω/Max. input
power: 5 W)
Rear panel
or
Front panel
SPEAKER
PHONES ∫
SPEAKER √
Select 'SPEAKER' with
the [PHONES/SPEAKER]
switch on the back of the
front panel.
2. Resetting the CPU: Although you have purchased
a brand new radio, some settings may be changed
from the factory defaults during the QC process. So
your radio can start from Factory Defaults resetting
the CPU is necessary. (Refer to p.17)
[POWER]
SPEAKER
[Y]
[Z]
IV