I Other Setting Items - Icom IC-2200H Instruction Manual

12
DIGITAL MODE OPERATION

I Other setting items

qPush [BANK
OPT
[V/MHz] several times to select the desired item.
w Rotate [DIAL] to select the desired value or condition.
z Push [BANK/OPTION] for 1 sec. then
BANK/OPTION
push [BANK/OPTION] or [MR/CALL] sev-
eral times to select the desired item.
x Push [Y Y ] or [Z Z ] to select the desired value
or condition.
D D Auto Reply
During Digital mode operation, auto reply function is avail-
able. This function replys to an individual station call even you
are away from the transceiver.
After the manual transmission (pushing [PTT]), the Auto
Reply setting is return to OFF automatically.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET
MONI LOW TONE
69
] for 1 sec. then push [BANK
(default: OFF)
DIGITAL
MUTE
NAR
MID
LOW
PRIO SCAN LOCK ANM DUP T-SCAN
S ET
M/CALL V/ MHz MONI LOW TONE
OPT ] or D D Digital Code
Sets the desired digital code for digital code squelch opera-
tion. Total of 100 codes (00–99) are available.
MUTE
NAR
MID
LOW
LOCK ANM
S ET MONI
D D Auto data Transmission
During slow data operation, auto data transmission function
is available. This function transmits when data are input from
PC via the [DATA] jack.
After the manual transmission (pushing [PTT]), the Auto
Transmission setting is return to OFF automatically.
MUTE
NAR
MID
LOW
PRIO AO BUSY
LOCK ANM
S ET MONI
PRIO SCAN
M/CALL V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
DUP T-SCAN PRIO SCAN LOCK ANM
LOW TONE M/CALL V/ MHz S ET MONI
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
DUP T-SCAN PRIO SCAN LOCK ANM
LOW TONE M/CALL V/ MHz S ET MONI
(default: 00)
DIGITAL PRIO AO BUSY
DUP T-SCAN PRIO SCAN
LOW TONE M/CALL V/ MHz
(default: OFF)
DIGITAL PRIO AO BUSY
DUP T-SCAN PRIO SCAN
LOW TONE M/CALL V/ MHz