I Memory Programming - Icom IC-703 Instruction Manual

7
MEMORY OPERATION

I Memory programming

• Programming in VFO mode
q Select
functions.
• Push [DISPLAY] once or twice to select .
• Push [MENU] one or more times to select
w Set the desired frequency and operating mode in
VFO mode.
• If you want to program the split frequency function, pro-
gram both receive and transmit frequencies into VFO A
and B, then turn ON the split function.
• If you want to program a repeater function, set a tone
frequency (pgs. 44, 45) in addition to the receive/trans-
mit frequencies.
e Rotate [M-CH] to select the desired memory chan-
nel.
• Select memory mode to confirm the contents, if desired.
• "}" appears if the selected memory channel is a
blank channel (and does not have contents).
r Push [
] for 1 sec. to program the displayed
(F-1)
frequency and operating mode into the memory
channel.
To check the programmed contents, push [
to select memory mode.
• Programming in memory mode
q Select
functions.
• Push [DISPLAY] once or twice to select .
• Push [MENU] one or more times to select
w Set the desired frequency and operating mode.
e Push [
] to select memory mode, then se-
(F-3)
lect the desired memory channel with [M-CH].
• Push [Y]/[Z] when you want to program blank chan-
nels.
r Push [
] for 1 sec. to program the displayed
(F-1)
frequency and operating mode into the memory
channel.
[MENU]
[M-CH] [F-1]
57
.
(F-3)
.
[Y]
[Z]
[F-3]
[DISPLAY]
[MENU]
[M-CH]
[EXAMPLE]: Programming 7.088 MHz/LSB into ch 12.
CW
VFO A
LSB
VFO A
LSB
]
VFO A
LSB
VFO A
[EXAMPLE]: Programming 21.280 MHz/USB into
ch 18.
USB
MEMO
CW
MEMO
USB
MEMO
USB
MEMO
[F-3]
[F-1] [DISPLAY]
TS
MODE
CH
M-CH SHIFT
CH
BLANK
CH
Push for
1 sec.
F-1
CH
M-CH SHIFT
CH CH
TS
CH
MODE
CH
Push for
1 sec.
F-1
CH
SPLIT
SPLIT