D Cw Operation - Icom IC-703 Instruction Manual

4
RECEIVE AND TRANSMIT

D CW operation

q Connect a paddle or straight key as at previous
page.
w Push
[ BAND]/[
(Y)
band.
e Push [MODE] momentarily to select CW mode.
• After CW mode is selected, push [MODE] for 1 sec. to
toggle between CW and Memory keyer modes.
r
While the quick set mode item "
CW mode, rotate main dial to select
mode.
• Push [DISPLAY] for 1 sec. to enter the quick set mode.
• Push [MENU] one or more times to select
• Push [DISPLAY] momentarily to return to normal oper-
ating mode.
t Rotate [AF] control to set audio to a comfortable
listening level.
y Rotate the main dial to simultaneously tune a de-
sired signal and its side tone.
u Set CW setting in the keyer set mode.
• Push [DISPLAY] once or twice to select .
• Push [MENU] one or more times to select
• Push [ ] for 1 sec. to enter the keyer set mode.
(F-2)
(p. 32)
i Set CW break-in operation as semi break-in, full
break-in or OFF.
• Push [MENU] one or more times to select "
."
• Rotate the main dial to select CW break-in operation.
➧ FULL: full break-in
➧ on
: semi break-in
➧ OFF : no break-in (ACC socket connection is neces-
sary as at previous page.)
o Set the CW delay time when semi break-in opera-
tion is selected.
• Push [MENU] one or more times to select "
."
• Rotate the main dial to set the desired delay time (see
p. 32 for details).
!0 Keying to transmit, use the electric keyer or pad-
dle to key your CW signals.
• The TX indicator lights red.
• The Po meter indicates transmitted CW signal
strength.
!1 Release keying to return to receive.
29
BAND] to select the desired
(Z)
" is selected in
CW or CWå
.
.
[AF] [TX] indicator [MODE] Main dial
[MENU] [F-2] [DISPLAY]
"CW" or "CWå" appears
LSB USB CW RTTY AM WFM
R
S1 3 5 7 9 20 40 60dB VFO A
P 5 10
O
F 2
CW
CW
BK
VFO A
S1
3 5 7 9 20 40 60dB
CH
P 5 10
O
CW
[Y]
[Z]
CH
Semi break-in
operation is
selected.
Appears
Delay time of 6.0
dots is selected
for semi break-in
operation.