I Vox Operation; D Vox Set Mode - Icom IC-703 Instruction Manual

6
FUNCTION FOR TRANSMIT

I VOX operation

The VOX (Voice-operated Transmission) function tog-
gles between transmit and receive with your voice.
This function provides an opportunity to input log en-
tries into your computer, etc., while operating.
q Select
.
• Push [DISPLAY] once or twice to select .
• Push [MENU] one or more times to select
w Push [
(F-1)
and OFF.
• "VOX" appears when the function is ON.
e Push [
] for 1 sec. to enter the VOX set
(F-1)
mode (below), then set the 'VOX delay,' 'VOX gain'
and 'ANTI-VOX' if desired.
r Select "
• Push [MENU] one or more times to select
• While speaking into the microphone, adjust 'VOX
DELAY' as desired.
t Select "
• Push [MENU] one or more times to select
• While speaking into the microphone, adjust 'VOX GAIN'
until the transceiver is transmitting.
y Select "
• Push [MENU] one or more times to select
• If the receive audio from the speaker toggles the trans-
ceiver to transmit during receive, adjust the 'ANTI-VOX'
to the point where it has no effect.
u Push [DISPLAY] to exit VOX set mode.

D VOX set mode

While is selected in SSB/AM/FM modes, push
[ ] for 1 sec. to enter the VOX set mode.
(F-1)
This item adjusts the VOX (Voice-activated Transmit)
delay time. The delay time can be adjusted from 0 to
2 sec. in 0.1 sec. steps.
This item adjusts the VOX gain for the VOX (voice ac-
tivated transmit) function.
This item adjusts the ANTI-VOX gain for the VOX
(voice activated transmit) function.
53
] to toggle the VOX function ON
" in VOX set mode.
" in VOX set mode.
" in VOX set mode.
.
.
.
.
USB
USB
USB
[F-1]
[MENU] [DISPLAY] Main dail
LSB USB CW RTTY AM WFM
R
VOX COM
3 5 7 9 VFO A
S1 20 40 60dB
CH
P 5 10
O
The default is 1.0 seconds.
The default is 5.
The default is 5.