3
BASIC OPERATION
I Operating mode selection
The following modes are available in the IC-703:
SSB (LSB/USB), CW, CW-å (CW reverse), RTTY
and åRTTY (RTTY reverse), FM, AM.
• SSB (LSB/USB), CW, RTTY, SSB-D, FM and
AM modes selection
To select the desired mode of operation, push
[MODE] one or more times, then push [MODE] for 1
sec., if necessary. See the diagram at right for the
order of selection.
• The selected mode is indicated in the function display.
• CW-å (CW reverse) mode selection
q When selecting CW mode, push [DISPLAY] for 1
sec. to enter quick set mode.
w Push [MENU] one or more times to select item "
" during CW mode.
• [Y]/[Z] or [M-CH] can also be used.
e Rotate the main dial to select CW reverse.
r Push [DISPLAY] to exit quick set mode.
CW-å" appears.
• "
• åRTTY (RTTY reverse) mode selection
q When selecting RTTY mode, push [DISPLAY] for 1
sec. to enter quick set mode.
w Push [MENU] one or more times to select item "
" during RTTY mode.
• [Y]/[Z] or [M-CH] can also be used.
e Rotate the main dial to select RTTY reverse.
r Push [DISPLAY] to exit quick set mode.
"åRTTY" appears.
•
Note: If a desired mode cannot be selected, it may be
hidden using initial set mode (p. 76).
I Volume setting
Rotate [AF] control to output a suitable audio level.
Decreases
No audio output
23
AF
RF/SQL
Increases
Max. audio output
OPERATING MODE SELECTION
USB
LSB
Memory keyer
CW
set mode
RTTY
SSB-D
FM
AM
[M-CH]
[MENU]
[AF]
[MODE]
Push
MODE
momentarily
Push
MODE
for 1 sec.
[MODE]
[Y]
[Z]
[DISPLAY]