System Board
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●
Memory modules
●
Processor
●
Expansion cards
To remove the system board:
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Lay the computer on its side with the rear facing toward you.
4.
Remove the front bezel
5.
Remove an expansion cards
6.
Disconnect the power, and data cables from the back of all installed drives.
7.
Disconnect all cables from the system board.
74
Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis
(Preparation for Disassembly on page
(Access Panel on page
(Front Bezel on page
37).
(Expansion Cards on page
36).
44).
35).