Computer Setup-Power; Computer Setup-Boot - HP Pro 3000 SFF Maintenance And Service Manual

Computer Setup—Power
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3-11 Computer Setup—Power
Option
After AC Power
Failure
XD (Execute Disable)
Computer Setup—Boot
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3-12 Computer Setup—Boot
Option
Boot-time Diagnostic
Screen
Esc: Boot Menu
F9: Diagnostics
F10: Setup
F11: Recovery
F12: Boot From LAN
(Boot Device Priority)
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
Floppy Group Boot
Priority
CD-ROM Group Boot
Priority
Description
Allows you to select system restart behavior after power loss:
●
Stay Off
●
Power On
●
Auto
Disables/enables the processor's XD feature.
Description
Disables/enables POST diagnostic messages display.
Disables/enables POST Esc: Boot Menu message display,
Disables/enables POST F9: Diagnostics message display,
Disables/enables POST F10: Setup message display,
Disables/enables POST F11: Recovery message display,
Disables/enables POST F12: Boot From LAN message display,
Allows you to specify which device groups will boot first, second, third, and fourth or to disable any
of the four:
●
CD-ROM Group
●
Hard Drive Group
●
Floppy Group
●
Network Boot Group
NOTE: MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating
system has started.
Specifies boot device priority within removable devices.
Specifies boot device priority within CD/DVD drives.
HP Pro 3010 – Computer Setup (F10) Utility 23