HP Pro 3000 SFF Maintenance And Service Manual page 189

Table D-2 Specifications – HP Pro 3015 Microtower
Desktop Dimensions
Height
Width
Depth
Approximate Weight
Temperature Range
Operating
Nonoperating
Relative Humidity (noncondensing)
Operating
Nonoperating (38.7°C max wet bulb)
Maximum Altitude (unpressurized)
Operating
Nonoperating
NOTE: Operating temperature is derated 1.0° C per 300 m (1000 ft) to 3000 m (10,000 ft) above sea level; no
direct sustained sunlight. Maximum rate of change is 10° C/Hr. The upper limit may be limited by the type and
number of options installed.
Power Supply
Operating Voltage Range
Rated Voltage Range
Rated Line Frequency
Power Output
Rated Input Current (maximum)
This system utilizes a passive power factor corrected power supply. The power factor correction is present in the 230V
1
operating mode only. This allows the system to pass the CE mark requirements for use in the countries of the European
Union. This supply requires the use of an input voltage range select switch.
1
15.14 in 385 mm
7.27 in 185 mm
16.36 in 416 mm
23.5 lb 10.66 kg
50° to 95°F 10° to 35°C
-22° to 140°F -30° to 60°C
10-90% 10-90%
5-95% 5-95%
10,000 ft 3048 m
30,000 ft 9144 m
115V 230V
90-132 VAC 180-264 VAC
100-127 VAC 200-240 VAC
50-60 Hz 50-60 Hz
300 W 300 W
8A @ 100 VAC 4A @ 200 VAC
Microtower 179